Small type glass tube level gauge L-type oil level gauge

Product Description

XK-UGS Small type glass tube level gauge L-type oil level gauge is a simple & reliable device for direct reading in atmospheric or pressurized tank ap - plication . Mounted side of the tank through flange or threaded connection . Liquid inside the tank passes through a transparent glass tube & liquid can be viewed through the glass tube and mea - sured by a scale mounted on the gauge . Glass Tube (A. Borosilicate glass; B. Quartz glass tube; C. Transparent Teflon tube; D. Acrylic plastic) fully Protected by C-cut frame.
These gauges are custom manufactured accord - ing to the C-C distance reuired. It is avail - able in single length of 2000 mm C-C Distance.We can extend the CC length by PVC tube.
We are providing Air Vent Plug at top & drain plug at bottom for taking sample. We can also provide Inbuilt Isolation Valve on request. PP construction is made with all PP isolation valves & internals
Glass tube water level meter, simple structure, small volume, light weight, material consumption, small installation size, and easy to operate, fast.Suitable for urban construction, chemical, metallurgy, petroleum, pharmaceutical, food, beverage, environmental protection and other industries.
Technique Parameters:
Glass type: borosilicate glass/mico/quartz glass tube
Gasket material: graphite gasket
Pressure for steel ball shut off automatically: ≥0.2Mpa
Steam pressure: ≤0.6Mpa. Steam sheath joint: G1/2″male thread
Technique Parameters:
Glass type: borosilicate glass/mico/quartz glass tube
Gasket material: graphite gasket
Pressure for steel ball shut off automatically: ≥0.2Mpa
Steam pressure: ≤0.6Mpa. Steam sheath joint: G1/2″male thread

small type right-angle glass tube level gauge

The small type right-angle glass tube level gauge is a new type of level gauge combining the advantages of glass tube level gauge, plate type level gauge and boiler water level gauge.(to overcome the original glass tube level gauge is afraid of broken, not solid, not safe, not resistant to pressure, display is not clear, the use of low temperature weakness) it can replace the glass plate level gauge to a certain extent, than the same characteristics of the level gauge price.

Characteristics of small type right-angle glass tube level gauge:

Visual instrument

Simple structure and easy maintenance

Integrated UG, UB and UGS (UNS) multiple advantages, low price

Glass tube Level indicator sight glass diesel fuel tank level gauge

1. Structure and working principle

Flanges are added to meter with up and low valves. The flanges connect with tank and make a communicator with tank. Then the liquid level will be read from the Transparent glass tube or glass plate directly. The upper and lower valves have steel ball inside. So if the glass plate or glass tube was broken by accident, the steel ball will block the channel under pressure, and to assure the container be sealed automatically which can prevent the liquid flowing out. Tubular Level Gauges are designed to view liquid levels using clear or red line Borosilicate (Pyrex) tubing. All valves use a stuffing box configuration to seal the glass tube, and have a ball check shutoff to prevent loss of vessel contents in case of glass failure. Operating pressure and temperatures are subject to the limitations of the tubular gauge glass and washer composition; consult with Pressure Products for gauge glass ratings. Tubular level gauge is used for visual liquid level indication and is the most commonly used instrument in the process industry. It is a simple and reliable device for level reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of the tank, so as to form a closed loop. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local level indication. Features

2. Choice of Tie Rod or C-Frame Construction. With or without isolating valve.

Material integrity assured through strict compliance of chemical composition analysis in a Standard Laboratory. H Grade Borosilicate glass tube 16/19/25 mm outer dia with  Packing. Glass tube can be removed online i.e. without disconnection from vessel Standard Connection: 1/2" / 3/4" / 1" Flange drilled to ASA 150#, others on request Alluminium/SS scale with 5 mm resolution as standard and 1 mm on request. Drain Plug 1/2" Vent Plug 3/4" and drain/vent valve as optional Safety Ball check device(optional). Defrost/illuminator available on request. Hydro test pressure: 12 KG/cm2, 100 Deg C max working temperature. Tie Rod Construction is 'light' and permits 360ºC visibility. C-Frame construction is robust and permits observation from Front & Rear. Both constructions are available in integral or inline arrangements. High quality, H grade borosilicate glass tube in 16/19/25mm outer dia is used. Available in single length having c/c distance = 1600 mm. Extended lengths are provided by coupling several tubes or gauge assemblies in series. Gland packing design provides tension free tube installation to achieve zero leakage. It also enables glass removal for replacement or cleaning without dismantling the gauge or disconnection from the vessel. Transparent Acrylic Plate mounted on C-Frame/Acrylic Pipe or slotted metallic pipe clamped on Tie Rod as glass protector can be provided if required, for additional safety to glass & personnel. Adjustable proximity/reed switch arrangement for level sensing with alarm relays. Structure: "standard type" D--------"thermal type" W Material: 1) Carbon Steel 2) Stainless Steel 3) PVC