Levelmeter Support

SERVICE MAINTENANCE After the level gauge is first put into service, or after change of glasses, once the level gauge has reached its normal operating temperature and pressure, carefully compress the glass joints by following up the tightening bolts working at opposite sides alternately. THIS MUST BE REPEATED SEVERAL TIMES WITHIN THE FIRST HOURS, and...Continue Reading

UHC Magnetic Level Gauge / Operation / Maintenance Guide Manufactured Specifically for Each Application   Every Magnetic Level Indicator is designed and manufactured specifically for each Level Application. Careful attention is given to process conditions, most importantly the Specific Gravity, Temperature and Pressure of the liquid to be measured.   Extreme caution should be taken...Continue Reading

Glass Tube Level Gauge Installation / Operation / Maintenance Guide Installation Instructions Only Qualified Personnel Who Are Familiar With Gauge Glass Valves And Their Operation Should Undertake Installation Of This Product. Failure To Properly Install Could Result In Serious Personal Injury And Property Damage.   Prior To Actual Installation, Turn Handwheel On Upper And Lower...Continue Reading

Glass Plate Level Gauge Installation / Operation / Maintenance Guide Receipt, Transport and Storage On receipt of the equipment, the outside packing has to be checked for any damage incurred while shipment. If the packing case is damaged, the local carrier should be notified immediately regarding the liability. Remove the envelope containing the packing list....Continue Reading